Air-water heat pump with L200 boiler with heat exchanger

• It is an environmentally friendly product, which operates with renewable energy sources with lower CO21 emissions.

• It has the highest energy efficiency class A + in its class, according to ErP regulations.

• Operates in a wide range of inlet air temperatures starting from -10 ° C to + 43 ° C.

• Heats the water to 65 ° C only with the heat pump.

• Highly efficient with a perfectly balanced cooling cycle, due to the electronically controlled compressor and the electronic expansion valve.

• Up to 75% reduction in electricity consumption.

• Electrical resistance for faster heating and achieving higher water temperature up to 75 ° C.

• Can be connected to other renewable energy sources such as Photovoltaic, Solar systems or boilers.

• Programmable with user-friendly control panel.

• Automatic anti-legionella operation.

• Automatic fault diagnosis system.

Capacity 194 L

Insulation (hard PU) 50 mm

Energy class A +

Maximum operating temperature 75 ° C

Maximum operating pressure 8 bar

Diameter 630 mm

Heating time (1) 8:59 h: min

Loading diagram L announced

Electric heater power 1.5 kW

Maximum HP absorption 0.663 + 1.5 (e-heater) = 2,163 kW

Minimum ÷ maximum temperature of the heat pump inlet air (90% relative humidity) -10 ÷ 43 ° C

Frequency 50 Hz

Annual electricity consumption in kilowatt hours under climatic conditions on average 811.7 kWh

230 V power supply

Compressor type Rotating

Minimum ÷ maximum temperature of the assembly site -10 ÷ 43 ° C

Compressor protection Heat switch with automatic reset

Maximum current in HP 3.1 + 6.5 (e-heater) = 9.6 A

Heat Pump Circuit Protection Safety Valve Against Overpressure With Automatic Reset

Necessary overload protection 16 A T fuse / 16 A automatic switch, characteristic C (to be expected during installation on power supply systems)

Fan Centrifugal

HP maximum adjustable temperature - ECO cycle 65 ° C

Internal protection Single safety thermostat with manual reset on a resistive element

Nominal air capacity 314 m³ / h

Maximum available pressure 50 Pa

Motor protection Internal thermal circuit breaker with automatic reset

Condenser Wrapped externally, not in contact with water

Coil for connection to a solar installation 1.0 m²

Coil for connection to auxiliary heat source N / A m²

Transport weight 112 kg

Sound power Lw (A) (4) 53 dB (A)

Automatic disinfection cycle against Legionella (5) YES

Minimum height of the space 1785 mm