Menu
Your Cart

Heat pump with boiler L190 MIDEA COMBO SOLAR

Heat pump with boiler L190 MIDEA COMBO SOLAR
Heat pump with boiler L190 MIDEA COMBO SOLAR
Heat pump with boiler L190 MIDEA COMBO SOLAR
Heat pump with boiler L190 MIDEA COMBO SOLAR
Heat pump with boiler L190 MIDEA COMBO SOLAR
Heat pump with boiler L190 MIDEA COMBO SOLAR
Heat pump with boiler L190 MIDEA COMBO SOLAR
Heat pump with boiler L190 MIDEA COMBO SOLAR
Heat pump with boiler L190 MIDEA COMBO SOLAR
Heat pump with boiler L190 MIDEA COMBO SOLAR
Heat pump with boiler L190 MIDEA COMBO SOLAR
Heat pump with boiler L190 MIDEA COMBO SOLAR
Heat pump with boiler L190 MIDEA COMBO SOLAR

Boiler for hot water production with integrated heat pump & possibility of connection with solar panels

• According to the heat pump principle, the unit absorbs heat from the outside air to produce hot water.

• Within the temperature range from -20 ° C to 43 ° C, the unit will not be affected by night, cloudy skies, rain and even snow • Complete isolation between water and electricity.

High protection: Pressure and temperature protection valve (PTR), Temperature switch (TCO) and automatic temperature switch (ATCO)

• No tank and fuel pipes, so zero risk of oil spill, fire, explosion, and so on.

• No contamination, the condenser element is wrapped around the enamel of the inner tank.

• Internal acrylic paint tank.

• Innovative system that makes water heat continuously and quickly with innovative heating methods of the combination of electricity and heat pump. Control automations.

• Automatic start and stop. • Automatic defrost. • Timer. • Automatic weekly sterilization operation.

• Automatic restart after power failure.

• Flexible installation achieved by large air inlets and pressurized duct outlets. The 25Pa air flow pressure allows ducts up to 10 meters long.

Characteristics:

• Refrigerant: R134a

• Power supply: 220V

• Triple energy boiler (electric resistor / heat pump / solar panel)

• Electrical resistance (backup)

• Container insulated with acrylic paint for complete isolation of metal / water

• Connection cross section: DN20

• Applies the principle of operation of heat pumps where it absorbs thermal energy from the outside environment and produces hot water with an efficiency of more than 30% compared to the oil boiler.

• Possibility of cooling adjacent areas during the hot water production process during the summer months

Write a review

Note: HTML is not translated!
Bad Good
Captcha
1,730.00€
Ex Tax: 1,395.16€
  • Stock: 1
  • Model: BO03.005
  • Weight: 120.00kg
  • Dimensions (Length x Width x Height): 560.00mm x 0.00mm x 1,760.00mm
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.